If you are telecom engineer apply now in Job send your information to ([email protected]) , may be you will qualify for interview SAMTEC will offer new products and solutions in the near future SAMTEC 2023 will have new technologies

Ethernet extension the CL1314

Ethernet extension the CL1314 Ethernet extension the CL1314

Ethernet extension doesn’t have to be expensive or difficult. Patton’s CL1314 long range Ethernet Extenders open the door to cost-effective Ethernet extension that is easy to set up. Featuring plug-and-play installation, the CL1314 CopperLink Ethernet Extenders leverage existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at high speeds over long distances.

Operating over standard 0.5 mm (24 AWG) voice-grade wiring, the CL1314 delivers speeds up to 5.7 Mbps and extends Ethernet connections across distances ranging from 2.7 to 6.9 km (1.7 to 4.3 miles). Whether you need connect to a remote office or private-network backbone to a corporate LAN—or interconnect such network-enabled devices such as PCs, digital sensors and IP cameras—Patton Ethernet Extenders offer the industry’s optimum combination of speed and distance.

Patton’s CopperLink Ethernet Extenders ensure hassle-free set-up and operation, while achieving the highest possible line rate for the required distance and electro-magnetic environment. Users “hard-set” the desired line rate via DIP switches or console Telnet.

The CL1314 comes with a built-in four-port, auto-sensing, 10/100Base-TX Ethernet switch that provides automatic medium-dependent interface crossover capability (auto-MDIX). That means you can use cross-over or straight-through cables (whichever is handy) to connect up to four Ethernet devices. The auto-MDIX feature detects the polarity of the cabling on each port, and automatically configures the signaling to match. Absolutely no user-configuration is required.

Operating at layer 2 of the OSI model (data link layer), the CL1314 transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN pass-through for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUS/TCP and PROFINET IO.

Set-up is easy! Simply connect up to four LAN devices to the Ethernet switch, plug the copper twisted-pair into each extender, and apply power! For simple, cost-effective and efficient Ethernet extension, Patton's CopperLink Ethernet Extenders are the ideal solution!

Distance on 24 AWG (0.5 mm)
Line Rate K Feet Miles km
192 22.5 4.26 6.9
256 22.5 4.26 6.9
512 22.1 4.18 6.7
768 19.5 3.69 5.5
1024 18.5 3.50 5.6
1280 18.5 3.50 5.6
1536 18.6 3.50 5.6
2048 16.5 3.13 5.03
2304 16.5 3.13 5.03
4608 11 2.08 3.35
5696 9 1.70 2.74

Title: Ethernet extension the CL1314 Counter: 0 Size: 1.38MB

  • High Speed Extension—Achieve speeds up to 5.7 Mbps.
  • Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application.
  • CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port.
  • Built-in 4-port Ethernet Switch—Connect up to four Ethernet devices using the integrated 4 X 10/100Base-T, auto-sensing, full/half-duplex Ethernet switch.
  • Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging.
  • Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link.
Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Typical Application When interconnecting sites on a corporate campus, buildings and network devices often lie beyond reach of a standard Ethernet segment. Now, you can use existing copper network infrastructure to connect remote LANs across longer distances and at higher speeds than previously thought possible.

Patton’s CopperLink long range Ethernet Extender is the ideal solution for simple, cost-effective, high-speed campus LAN extension. Ethernet plug-‘n’-play operation gets your network up-and-running in seconds. Providing four auto-sensing full/half duplex 10/100Base-T Ethernet ports—plus an integrated crossover switch for hassle-free system setup—the value of this Ethernet extender is unsurpassed.

  • Plug-and-Play—Just unpack a pair of extenders and plug in the cables. Apply power and your connection is up and running. It just doesn’t get any easier!
High Speed/Long Reach
  • The CL1314 Ethernet extender provides the industry’s ultimate combination of speed and distance!

Protocol Transparent to higher layer protocols
Transmission Line Single twisted pair
Line Rates MbpsRates from 192 kbps to 5.7 Mbps, selectable in all 64 kbps increments up to 5.7
Front Panel LED Status Indicators WAN: Link, LAN (Ethernet): Link/Act, Power
Line Coding TC-PAM 16 for rates from 192 to 2.3 Mbps; TC-PAM 32 for rates above 2.3 Mbps
Connectors RJ-45 on copper line side and 4 x 10/100 Ethernet, shrouded male IEC320 power connector
Line Interface Transformer coupled, 1500 VAC isolation
Management DIP switch, Telnet console
MTBF 4.7 years
Power External 90–260 VAC, 50–60 Hz (Universal Input)
Power Consumption [email protected]
Operating Temp. 32 to 122°F (0 to 50°C)
Humidity 5 to 95%, non-condensing
Altitude 0 to 15,000 ft (0 to 4,600 m)
Dimensions 4.7 x 1.52 x 5.00 in. (106 x 390 x 127 mm)
Weight 2.0 lbs (1.0 kg)
Compliance FCC Part 15A, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC