If you are telecom engineer apply now in Job send your information to (info@samtecyemen.com) , may be you will qualify for interview SAMTEC will offer new products and solutions in the near future SAMTEC 2023 will have new technologies

SmartNode™ 4830

SmartNode™ 4830 The SmartNode™ 4830 DSL Series combines a toll-quality analog VoIP gateway with DSL connectivity—without the need for a separate DSL modem. This all-in-one gateway also includes IGMP v2/v3 proxy functionality to support video delivery services. This is triple-play at your fingertips!

The SN4830 DSL Series offers models with combinations of 2 to 8 FXS ports, and 2 to 4 FXO ports. The 10/100Base-T LAN port supports Auto-MDIX and VLAN. The integrated DSL port provides direct access to broadband networks. Like every SmartNode, the 4830 DSL series supports industry standard VoIP signaling protocols SIP, H.323, T.38 Fax-Relay, plus fax and modem-bypass and is interoperable with leading softswitches and VoIP services.

Quality of Service (QoS) is ensured by using advanced voice prioritization and traffic management. DownStreamQoS™ ensures voice without interruptions even over best-effort internet connections. Packet labeling according to 802.1p, ToS, and DiffServ enable integration into managed QoS networks.

The SN4830 is the solution for service providers and network integrators looking for seamless integration of analog phones and PBXs into converged VoIP-data networks. It ensures easy setup, continuous trouble-free operation, and cost-effective deployment. The support of the leading VoIP signaling protocols ensures interoperability with third-party equipment and protects your investments for the future.
Title: The SmartNode™ 4830 Counter: 0 Size: 1.82MB

supporting voice from any local or remote connections with Quality of Service brings true access to all users. Now integrating into local DSL, Cable, or IP access services is clean and complete

 
 

Voice Signaling
  • SIPv2
  • H.323v4
  • SIP call transfer, redirect
  • Overlap or en-bloc dialing
  • DTMF in-band, out-of-band
  • Configurable tones
Broadband Access
  • ADSL2+ ITU-T G.992.5, Annex A/M, B (Up to 24 Mbps )
  • 4-wire G.SHDSL ITU-T G.991.2, Annex A, B, F, G (Up to 11.4 Mbps)
  • PPPoE or PPPoA
  • 8 PVCs, each UBR, CBR, or VBR-rt selectable
  • I.610 OAM F4/F5 support
  • G.994.1 (G.hs)
Analog Connectivity
  • 2-wire Loop start RJ-11/12
  • Short haul loop, 1.1 km@3REN
  • EuroPOTS (ETSI EG201 188)
  • Programmable AC impedance, feeding, and ring voltage
  • On hook voltage 29V DC
  • Caller-ID Type 1/2 FSK and ITU V.23/Bell 202 generation
IP Connectivity
  • One 10/100 Base-T Ethernet port
  • Auto-MDIX
  • DHCP Client/Server
  • PPPoE Client (multi-session)
  • IP Multi-Netting, VLAN, Secondary IP
  • IPv4, RIPv2, ICMP
  • ACL Firewall
  • DNS, DynDNS
  • SNTP Client
  • Optional IPSec VPN (DES, 3DES, AES)
Voice Processing
  • G.711µ-law/A-law
  • G.723.1 (5.3 or 6.4 kbps)
  • G.729ab (8 kbps)
  • G.726 (16, 24, 32, 40 kbps ADPCM)
  • G.168 Echo Cancellation (25ms)
  • 8 parallel analog voice connections
  • DTMF detection and generation
  • Silence Suppression and comfort noise
  • Adaptive and configurable dejitter buffer
  • Configurable packet length
Fax and Modem Support
  • G.711 transparent Fax
  • T.30
  • T.38 Fax Relay (9.6k, 14.4k)
Call Routing & Services
  • Regular Expression number matching
  • Regular expression number manipulation
  • Least Cost Routing
  • Number Blocking
  • Short-Dialing
  • Digit Collection
  • Distribution- and Hunt-groups
Quality of Service (QoS)
  • Voice priority, DownStreamQoS™
  • Traffic Shaping/Policing
  • IEEE 802.1p/Q
  • 4096 VLANs (Tag insertion/deletion)
  • TOS, DiffServ Labeling
Management
  • Web-based GUI
  • Fully Documented CLI
  • Telnet and HTTP access
  • TFTP configuration up- and download
  • TFTP firmware upgrade
  • SNMPv1 agent (MIB II and private MIB)
  • Built-in diagnostic tools
  • Secure Auto-Provisioning
Power & Packaging Desktop Metal chassis
Dimensions 11.5 x 1.85 x 6.2 in. (29.2 x 4.7 x 15.7 cm)
Weight 1.85 lbs. (840 g)
Power Consumption 4 W
Operating Temp. 32–104° F (0–40°C)
Operating Humidity Up to 90%, non-condensing
Compliance
  • EMC Compliance: EN55022 & EN55024
  • Safety Compliance: EN 50950
  • CE Compliance
  • FCC Part 15 Class A