OnSite EFM ™ Model 3088A/I Product no: 636

     Patton’s Model 3088A/I G.SHDSL.bis OnSite EFM CPE is the perfect choice for users or service providers who need high-speed dedicated network connections. Based on the ITU and ETSI G.Shdsl G.991.2 standard, the 3088A/I enables providers to extend their reach-and-range by delivering rate-adaptive nx64 symmetrical speeds up to 5.7 Mbps—all over a single pair of wires.

The OnSite 3088A/I uses Patton’s Plug ‘n’ Play features to remove any CPE configuration issues when used with any Patton CO concentration solution, even another 3088A/I CPE. Just set the units to their default mode and plug them in. The remote modem configures automatically and the link is up and running in seconds. With support for remote console link configuration changes and operating statistics are available via the out-of-band EOC channel. Remote and local loopback adds to the manageability of the link. Use remote console when deploying OnSite EFM CPEs either back-to-back or with a ForeFront system to improve the manageability of the EFM CPE.

The Model 3088A/I is available with a 4-port 10/100 Ethenet switch.
File name: OnSite EFM ™ Model 3088A/I
Counter: 1
Size : 2.51MB
Download

  • nx64 Rates to 5.7 Mbps—With multiple full-duplex symmetric rates available, users select the bandwidth option they need
  • 4 x 10/100 Ethernet Interfaces—Connects multiple network-enabled devices
  • Software Upgradeable —Software upgrades make it easy to keep the OnSite EFM CPE in service for years
  • Plug ‘n’ Play—Just plug them in and the link comes up in seconds. Set the unit to use G.Handshaking and the selection of optimal link speeds can also be done automatically
  • Local and Remote Console—With remote console, any Patton G.SHDSL EFM modem (3296RC or 3202) can be used to manage the remote CPE modem



  • The Model 3088A/I OnSite EFM CPE excels in manageability even in point-to-point configurations.
  • Plug ‘n’ Play automatically configures a remote unit based on parameters stored in the local unit.
  • Secure console lets an operator log into a unit to manage and configure it locally.
  • Remote console makes  configuration and management of a remote unit easy over an out-of-band channel.
  • OnSite EFM CPEs are software upgradeable from the console port.
  • When attached to ForeFront™ aggregators, the 3088A/I can be managed via an SNMP proxy.
 

Other products of the same category

Routers 3201 & 3241